United Kingdom · Calculators
Pipe friction loss calculator
Calculate straight pipe and fitting losses with Darcy-Weisbach, using actual internal diameter, flow, liquid density and supplied Darcy friction factor.
United Kingdom · Choose an edition
Calculation method
I use one constant-diameter pipe segment.
Enter the Darcy factor for the actual flow regime and sum fitting K-values referenced to the same segment velocity.
For several diameters, calculate each section separately and add its pressure loss.
Continue the calculation with Water pipe velocity calculator, Pump and system curves, Heating water flow rate calculator.
Method and assumptions
- No friction factor, roughness or allowable velocity is inferred.
- A Fanning factor must be multiplied by four before entry.
- Static lift, equipment losses, pump efficiency, cavitation, transients and compressible or two-phase flow are excluded.
- Hydraulic dissipated power is not pump electricity.