United Kingdom · Calculators
Building heat loss calculator
Calculate surface, thermal bridge, infiltration and ventilation losses separately, using your areas, U-values, boundary temperatures and heat recovery assumptions.
United Kingdom · Choose an edition
Calculation method
I use four surface rows and four linear bridge rows.
Set unused areas or lengths to zero; active rows require their coefficients and boundary temperatures.
Exclude openings from opaque areas and repeated bridges already included in U-values.
Air leakage is separate from balanced mechanical ventilation.
Continue the calculation with Heat pump balance point, Low temperature radiator output calculator, Heating water flow rate calculator.
Method and assumptions
- Steady heat balance only: no warm-up, solar gains, internal gains, ground model or official heating design.
- Negative transfers remain visible; heating demand is limited to zero before applying your reserve. 1.2 kg/m³ and 1005 J/(kg·K) are editable dry-air approximations.